Technical Data Technical Data - Jonsered RS52 Operator's Manual

Technical data
Technical data
Engine
Cylinder displacement, cu.in/cm
Cylinder bore, inch/mm
Stroke, inch/mm
Idle speed, rpm
Recommended max. speed, rpm
Speed of output shaft, rpm
Max. engine output, acc. to ISO 8893
Catalytic converter muffler
Ignition system
Manufacturer/type of ignition system
Spark plug
Electrode gap, inch/mm
Fuel and lubrication system
Manufacturer/type of carburetor
Fuel tank capacity, US pint/litre
Weight
Weight without fuel, cutting attachment and guard, Lbs/kg 18,5/8,4
Sound levels
(see note 1)
Equivalent sound pressure level at the user's ear,
measured according to ANSI B175.3-1997, dB(A),
min/max:
Vibration levels
Vibration levels at handles, measured according to
2
ANSI B175.3-1997, m/s
At idle, left/right handles, min.:
At idle, left/right handles, max.:
At max. speed, left/right handles, min.:
At max. speed, left/right handles, max.:
Note 1: Equivalent noise pressure level is calculated as the time-weighted energy total for noise pressure levels under various
working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.
NOTE! Noise pressure at the user's ear and vibration on the handles are measured with all the machine's approved cutting
equipment fitted. The table indicates the highest and lowest values.
RS44/RS52
Approved accessories
Centre hole in blades/cutters, Ø 20 mm
Grass blade/grass cutter
Saw blade
Plastic blades
Trimmer head
Support cup
30 –
English
TECHNICAL DATA
RS44
3
2,70/44,3
1,65/42
1,26/32
2700
13500
10500
2,0/9000
No
EM/ET
NGK BPMR 7A/
Champion RCJ 7Y
0,02/0,5
Zama C1Q
1,70/0,8
100/103
2,5/2,7
3,5/3,5
3,3/3,3
4,8/5,4
Type
Output shaft thread M12
Multi 255-3 (Ø 255 3 teeth)
Multi 300-3 (Ø 300 3 teeth)
Opti XS 200-22 (Ø 200 22 teeth)
Opti XS 225-22 (Ø 225 22 teeth)
Polytrim Ø 300
Trimmy S II
Auto 55
Fixed
With ball bearing
RS52
3,10/50,8
1,77/45
1,26/32
2700
13500
10500
2,4/9600
No
EM/ET
NGK BPMR 7A/
Champion RCJ 7Y
0,02/0,5
Walbro HDA
1,60/0,75
20,1/9,1
98/104
3,4/4,0
3,4/4,0
1,4/3,0
5,8/7,4
Cutting attachment guard, Art. no.
502 26 34-03
502 26 34-03
502 27 22-01
502 03 94-05
503 91 60-03 / 502 26 34-03
503 91 60-03
503 91 60-03
-
-