Trigger Control - Denon HEOS Link Owner's Manual

Contents
o Trigger Control
If the power amplifier to be connected to this unit has a trigger input
connector, connect it to the TRIGGER OUT jack of this unit using the
included IR Direct cable. A signal up to 12 V/150 mA is output from the
TRIGGER OUT jack.
Power amplifier
DC12V
150mA
MAX.
RESET IR TRIGGER
OUT OUT
AC IN
PRE OUT
Setup Use
TRIGGER IN
5V1A
COAXIAL OPTICAL OPTICAL
USB NETWORK
OUT OUT IN
SUB
WOOFER LINE IN AUX IN
Troubleshooting
38
Status LED Appendix