Echo CS-400 Instruction Manual page 5

SYMBOL FORM
Symbol form/shape Symbol description/application Symbol form/shape Symbol description/application
Carefully read the Instruction
manual
Wear eyes, ears and head
protection
Chain brake operation
Emergency stop
STOP
Choke control "Cold Start"
position (choke closed)
Oil and gasoline mixture
DECALS
Part Number X503-007391
CS-400
WARNING!! Read and follow all
safety precaution in the instruction
manual. Failure to follow
instructions could result in serious
personal injury.
Part Number 900191-30131
TO AVOID KICKBACK
1. Hold the chain saw firmly with both
hands.
2. Don't let the nose of the guide bar
contact any obstruction.
3. Tip contact may suddenly move the
guide bar upward and backward,
which may cause serious injury.
Chain oil fill
Chain oil pump
Chain oiler adjustment
Carburetor adjustment
- Low speed mixture
Carburetor adjustment
- High speed mixture
Carburetor adjustment
- Idle speed
Part Number X524-001810
REPLACEMENT BAR AND CHAIN
GUIDE BAR*
PART NO.
16" 16A0ED3757 OREGON 91VG
18" 18A0ED3762 OREGON 91VG
*Or equivalent
Note: There may be other replace-
ment components for achieving
kickback protection. For details,
please refer to the chain and bar
combination sheet shown in the
instruction manual.
Locate these safety decals on your unit. The
complete unit illustration found in the "NOMEN-
CLATURE OF PARTS" section will help you locate
them.
Make sure the decal is legible and that you under-
stand and follow the instructions on it. If a decal
cannot be read, a new one can be ordered from
your ECHO dealer.
5
CHAIN*
TYPE LINKS
57
62
CS-400