13. • Ice Maker connected to electricity.
• Mold temperature above 15°F.
• Thermostat opens.
• Motor is rotating.
• Mold heater off.
• Control Arm swinging down.
• Shut-off Switch closed C to NC.
• Hold Switch closed C to NO.
• Water Fill Switch open.
14. • Ice Maker connected to electricity.
• Mold temperature above 15°F.
• Motor not rotating.
• Mold heater off.
• Control Arm in down position.
• Shut-off Switch closed C to NC.
• Hold Switch closed C to NO.
• Water Fill Switch open.
Ice Maker (Freezer Compartment)
Figure 4-31.
Figure 4-32.
4-51