Table of Contents
Advertisement
To adjust only the current color correction settings for your job through a supported driver:
Operating System
Windows 2000,
Windows XP, or
Windows Server 2003
Mac OS X, version
10.2 and higher
Phaser® 8510/8560MFP Multifunction Product
Steps
1.
Select the TekColor tab.
2.
Select the desired color correction.
3.
Click the More Options button to open the Color Adjustment Options
dialog box.
4.
Make the desired adjustments to the sliders for your job.
5.
If desired, select Apply to CMYK or Print Settings on Page.
6.
Click the OK button to save your changes in the Color Adjustment
Options dialog box.
1.
In the Print dialog box, select Image Quality from the drop-down list.
2.
Select the desired color correction.
3.
If desired, select Print Settings on Page.
4.
Click the More Options button to open the Color Adjustments dialog
box.
5.
Make the desired adjustments to the sliders for your job.
6.
If desired, select Apply to CMYK.
7.
Click the OK button to save your changes in the Color Adjustments
dialog box.
1-10
Using Color Corrections
Advertisement
Table of Contents
Troubleshooting
