Toshiba e-studio550 Operator's Manual page 70

1 Place paper in the drawer(s).
- When using this mode in bypass copying, be sure to specify
the paper size.
To make copies onto paper which is not the same size
as originals, press the ZOOM... key to enter the right menu,
and press the size you desire and the AMS key.
2 Place the originals.
3 Press the EDIT key to enter the edit menu, and
press the 2IN1/4IN1 key.
4
Select the type of image combination.
- Press the 2IN1
4IN1 DUPLEX ) key.
5 Select the type of the original.
- Press the 1 SIDE (or 2 SIDE ) key.
Select other copy modes as required.
6 Press the START key.
- When placing an original on the glass, perform steps 5 and 6
on page 2-3 as needed.
Page 2-4
Page 5-10, 5-11
Page 2-9
(or 4IN1 , 2IN1 DUPLEX or
1
2
3
4
5
6
7
8
9
10
11
12
4-13