Shindaiwa T3410 Owner's/Operator's Manual page 7

Assembly and Adjustments
Hook Up Throttle Cable
Knob
Figure 6
XST019A
1. Loosen the air cleaner cover knob and re-
move the air cleaner cover. See Figure 6.
Cable
Adjuster
Throttle
Cable
Black
Black
Ignition Lead
Ignition Lead
Figure 7
2. Loop the ribbed cable tube under the
tube and to the top left side of the en-
gine and push cable through the cable
adjuster. See Figure 7.
Assembly and Adjustments
Adjust Throttle Lever Free Play
The throttle lever free play should be
approximately 4-6 mm. See Figure 10. Make
sure that the throttle lever operates smooth-
ly without binding. If it becomes necessary
to adjust the lever free play, follow the proce-
dures and illustrations that follow.
T3410
C3410
251043
4-6 mm
Throttle Free Play
Figure 10
Air Cleaner
Connect the
Cover
throttle cable
Figure 8
3. Connect the bullet shaped end of the
throttle cable to the throttle lever on top
of the carburetor. See Figure 8.
Push ends
together
3410B
Figure 9
4. Connect ignition leads. See Figure 9.
1. Loosen the lock nut on the cable
adjuster. See Figure 11.
2. Turn the cable adjuster in or out as re-
quired to obtain proper free play 4-6 mm.
See Figure 11.
3. Tighten the locknut.
4. Reinstall the air cleaner cover.
C35013
CAUTION!
Wiring runs must not interfere with
throttle operation.
Lock
Cable
Nut
Adjuster
Figure 11
7