Advertisement
Battery Installation
One CR2032 3V battery is included with the remote control. Remove the battery
drawer at the bottom back of the remote by squeezing the side and pulling the
drawer out. Please insert the battery into the remote with the positive side up as
shown on the drawer. If it is not going to be used for extended periods of time, we
recommend that you remove the battery out from the remote control and store it
in a safe dry place.
NOTE: Always keep the battery and remote control out of the reach of children.
Cleaning and Storage
Bottom of
Remote
Fig. 4
10
Using the Remote Control
Speed Settings
Wind Mode Selector
Timer Settings
• Before you clean the fan, turn the fan OFF and unplug it.
• Use a dry cloth to clean the external surfaces of the fan.
DO NOT USE WATER, WAX, POLISH OR ANY CHEMICAL SOLUTION.
– Clean your fan using the above-mentioned steps, then pack the fan in its
original package and store in a cool dry place.
Power ON/OFF
Oscillation ON/OFF
Timer Settings
Fig. 5
1 1
Advertisement
