Ford F-150 2002 Workshop Manual page 13

Hide thumbs Also See for F-150 2002:

2002 F-150 Workshop Manual

28. Connect the BPP switch electrical connector.

Insert the wiring harness locators.

Early build vehicles

29. Install the LH and RH windshield side garnish mouldings.

30. Install the LH and RH A-pillar passenger assist handles.

1. Position the LH and RH A-pillar passenger assist handles.

2. Install the four screws and four screw covers.

Late build vehicles

31. Install the LH and RH windshield garnish mouldings.

Align the tab on the mouldings with the instrument panel.

32. Install the LH and RH A-pillar passenger assist handles.

1. Position the LH and RH A-pillar passenger assist handles.

2. Install the four screws and four screw covers.

All vehicles

33. If equipped, install the alternative fuel control module (AFCM).

1. NOTE: The AFCM is attached with Velcro®.

Attach the AFCM by pressing it into its original position.

2. Connect the electrical connector.

http://www.fordtechservice.dealerconnection.com/pubs/content/~WS21/~MUS~LEN/19/S...

Page 13 of 16

2/18/2010