Something Not Working - John Lewis JLBIOS610 Instruction Manual

Something not working

If the oven is not working correctly, please
carry out the following checks, before
contacting your local Service Force Centre.
Problem
The oven is not heating up
The oven lighting is not operating The oven light bulb is faulty
F11 appears in the clock display
A fault code that is not listed
above appears in the clock
display
If you are unable to remedy the
problem by following the above
suggestions, please contact your
dealer or our extended warranty
administrators on 0870 010 7887 who
will give you the details of your local
repair agent.
Important! If you call out an engineer to a
fault listed below, or to repair a fault caused
by incorrect use or installation, a charge will
be made even if the appliance is under
guarantee.
Possible cause
The oven has not been
switched on
The clock has not been set
The required settings have not
been set
The oven's automatic cut-out
has been triggered.
The house wiring fuse (in the
fuse box) has tripped
The meat probe has short
circuited or the plug of the
meat probe is not firmly in
position in the socket
Electronic fault
29
Possible solutions
Switch oven on
Set the current time on the clock
Check the settings
See Automatic cut-out
Check fuse. If the fuses trip
several times, please call a
qualified electrician
Replace oven light bulb
Insert the meat probe plug into
the socket on the oven side wall
as far as it will go.
Switch the appliance off and on
again via the house fuse or the
safety switch in the fuse box. If
it is displayed again, please
contact the Customer Care
Department
Warning! Repairs to the appliance
are only to be carried out by qualified
service engineers. Considerable
danger to the user may result from
improper repairs.