Factory Shipment Setting - Pioneer PRO-1410HD Field Service And Training Manual

Repeat the procedures of

MODEL NAME
SERIAL/NUMBER
SOFT WARE VERSION
USAGE TIME
T1 025
T3 025
(7) Following the above, setting must be carried out without fail according to "3-2. Factory shipment
setting (Initial setting)"
3-2.Factory shipment setting (Initial setting)
(1) Press the [MENU/ENTER] ke to select the [FUNCTION] menu.
(2) Move the POSITION/CONTROL keys of [
POSITION/CONTROL keys of [
(The asterisks * shown below denote the numerals or the characters.)
J : PDP-615PRO
A : PDP-614MX / PRO-1410HD
G : PDP-615EX
(3) Press the keys in the order of [MUTE] → POSITION/CONTROL [
[ ] → [OFF TIMER] to make "Factory shipment setting". When "Factory shipment setting" is
executed, the red characters of [SET] is shown for about 5 seconds on the right side of the
[DESTINATION ALPHABETS]. The setting is finished when these red characters of [SET] go out. In
regard to the factory shipment setting values, refer to the descriptions given below.
and above, and enter all inputs of [DISS00001XX] from the left side.
 
MONITOR INFORMATION
: PDP-614MX
DISS 00001XX
:
: F123
: 00000H
T2 025
T4 - -
[MENU/ENTER] NEXT
] and [
SCART
SHIP
LIMIT-VD
LIMIT-PC
GAMMA MD
VOL OFFSET
FHCRT COMP
ACTVH TIME
PSC-T
EXT-PC
[MENU/ENTER] NEXT
[EXIT] PREV
] and [ ] to the item of [SHIP]. Then, move the
] to select [DESTINATION ALPHABETS] shown below.
: Specifications for use in Japan
: Specifications for North America
: Specifications for European countries
FUNCTION
OFF SAFEL MODE ---
A PLE TEST OFF --
OFF VD2 VLIM
ON VD2 YCORB
12 VD2 YCOREN ON
2 VD2 CORB
3 VD2 COREN
2 VD OUT
OFF ROTATE PTN
OFF BLUE GAIN
[EXIT] PREV
36
5HZ
--
--
ON
10
1
OFF
] → POSITION/CONTROL