Selection Of "Blue Back; To "Reset Default" From The Factory Settings To Your Own Custom Settings - Akai 42” Operating Insructions

Note: A closed caption signal may not display in the following situations:
▪ when a videotape has been dubbed
▪ when the signal reception is weak
▪ when the signal reception is nonstandard
Select "Off" to close this function.
Press
Hot keys:
- You can also press the CCD button on the remote control to enter Closed
Caption menu.
 Selection of "Blue Back"
Press the Menu button, and then
press or
"Setup" menu appears.
Press
your selection.
Press
"On" or "Off".
Press the Menu or Exit button to
return or exit.
 To "Reset Default" from the factory settings to your own custom settings
Press the Menu button, and then press
appears.
Press
your selection
Press the Enter button to confirm
and pop up a menu.
Press the Enter button to confirm, it will reset to restore factory default
settings. After that, a confirmation message will pop up.
Note: This will only reset the items in the setup menu and does not include the
protected-items. ( Needs pin code enter).
30
Menu button to return or exit.
button until the
or button to highlight
or button to select
or button to highlight
or button until the "Setup" menu