Starting Phone Assistant Server For The First Time - Panasonic KX-NCS1101 Operating Manual

1.1 Starting Phone Assistant Server for the first time

1.1 Starting Phone Assistant Server for the first time
1.
Double-click the PA Server shortcut on the desktop.
–or–
Start PA Server (CTI control) from the Start menu (Start ® All Programs ® Panasonic ® KX-TDA PA
Server® PA Server).
Note
•
Start PA Server runs automatically if the Load PA Server on Windows StartUp check box is
checked during installation.
•
If PA Server (CTI control) and PA Services (Communication interface) are installed on separate
PCs, activate PA Server (CTI control) first, and then activate PA Services (Communication
interface). PA Manager (Web server) starts automatically after PA Services (Communication
interface) is successfully connected to PA Server (CTI control).
•
The user can activate PA Services (Communication interface) manually by following the
instructions below.
–
Double-click the PA Services shortcut on the desktop.
–or–
Start PA Services (Communication interface) from the Start menu (Start ® All Programs ®
Panasonic ® Phone Assistant Manager ® PA Services).
2.
Enter the following in the corresponding fields, and click OK:
Username field: administrator
Password field: 1234 (default)
Note
•
If the administrator changed the password during installation, enter the new password.
6 Operating Manual—Server Document Version 2007/2/19