Amp (Amp Modeling) - Korg ToneWorks Pandora PX4D Owner's Manual

B OD Overdrive for bass.*
B DIST Distortion for bass.*
B FUZZ Fuzz for bass.*
PREAMP1 Preamp set to a clear tone for bass.
PREAMP2 Preamp set to a muted tone for bass.
BALANCE Creates the sound of blending the output of two pickups for
bass.
LOWCUT Filter that cuts the unwanted low-frequency range. Effective for
recording.
FRETLES Settings that simulate the sound of a fretless bass.
*: This is usually an effect for bass, but you can use it with the SYNTH amp model to produce a thick
sound when using a guitar.

AMP (Amp Modeling)

When using Amp Modeling, the control knobs (GAIN/MID, BASS, TREBLE, VOLUME) and Value
dial will be active. The VOLUME knob can still be used even when Amp Modeling is "OFF."
If SYNTH is selected as the type, the control knobs will control oscillator selection, VCF setting,
direct level, and synth level respectively. Types marked by an asterisk* can also be selected by the
amp modeling selector. In order to take full advantage of the characteristics of Amp Modeling, we
recommend that you use it in conjunction with Cabinet Modeling when listening through head-
phones or when recording from line output.
32
TYPE (π/† button) VALUE (Value Dial)
Amount of distortion.
(1.0...10.0)
Adjusts tone. (0...10.0)
Adjusts frequency. (0...10.0)
Adjusts tone. (0...10.0)