American Audio VMS4 Quick Start Manual page 3

Professional digital producer

Hide thumbs Also See for VMS4:

NTRODUCTION

Thanks you for purchasing the VMS4™!

This brief guide is a step by step instruction to get you up and running as quickly as possible.

ETTINGS

• Unpack your new VMS4™.

• Plug your VMS4™ in to your computer using the included USB cable.

• Plug your VMS4™ into a power outlet using the included power adaptor.

• Turn on the VMS4.

• Make sure the Interface Mode switch on the front panel (4 Out/8 Out) is set to 4 OUT.

• Make sure that the USB/ANALOG switches on the front panel on MIDILOG™ channels 2 & 3 are set to USB.

• Make sure the NORMAL/REVERSE switch on the front panel is set to NORMAL.

• On Channel 2 & 3, make sure the GAIN Knob is set to 12 o'clock.

VMS4™

Quickstart Guide Page 3