Hardware Installation - TRENDnet TW100-S4W1CA Quick Installation Manual

4-port broadband router

Hide thumbs Also See for TW100-S4W1CA:

2. Hardware Installation

Note: Gather all information related to your Internet Connection before you start. If necessary,

contact your Internet Service Provider (ISP).

1. Verify that you have an Internet connection

when connecting your computer directly to the

Cable or DSL modem. Open your browser (e.g.

Internet Explorer) and type in a URL (e.g.

http://www.trendnet.com) in the address bar.

2. Power off your cable or DSL modem.

3. Disconnect the network cable from your Cable

or DSL modem and your computer.

4. Connect one end of the provided network cable

to one of the TW100-S4W1CA's LAN (1~4)

ports. Connect the other end of the cable to the

computer's network port.

5. Connect one end of another network cable to

the TW100-S4W1CA's WAN port. Connect the

other end of the cable to your modem's network

port.

Internet

Cable/DSL Modem

Table of Contents