Page 1
Requirements • DSL or Cable modem for broadband Internet access. • Standard Network cables. • TCP/IP network protocol installed on each PC. • Wireless Access Point requires Wireless devices be com- pliant with the IEEE 802.11g or 802.11b specifications. Setup Physical Installation 1.
Page 2
2. Use standard LAN cables to connect PCs to the Switching Specified (Fixed) IP Address allocated to you, and Hub ports on the Wireless Router. Both 10BaseT and IP Address related information. 100BaseT connections can be used simultaneously. PPPoE Login name and password. 3.
Page 3
PC Setup - Windows to be changed. To view the properties, select the TCP/IP entry for your network card, as shown above, and click the Properties button. You will see a screen like the ex- ample below. TCP/IP Setup • If using the default Wireless Router settings, and the default Windows TCP/IP settings, no changes need to be made.
2. Click on “Internet Protocol TCP/IP” in the Local Area set up an Internet mail account now?". Connection Properties Window and click on the Proper- 7. Click Finish to close the Internet Connection Wizard. ties button and the following window should appear. Setup is now completed.
Macintosh Setup Wireless Setup 1. Open the TCP/IP Control Panel. In order to use the Access Point, other Wireless devices must 2. Select Ethernet from the Connect via pop-up menu. use the same SSID and WEP settings as the Wireless Router.
TRENDware provides FREE technical support for all customers for the duration of the warranty period on this product. TRENDware Technical Support Tel: +1-310-891-1100 Fax: +1-310-891-1111 E-mail: support@trendware.com www.trendnet.com Monday ~ Friday, 7:30AM ~ 6:00PM Pacific Stan- dard Time (except holidays) Page 11 Page 12...