Lenovo 8200 Series Installation Manual page 95

To run user diagnostics in the CLI:
Use QConvergeConsole CLI (qaucli), a unified command line utility, to manage all QLogic adapter
models, including running user diagnostics. The overall option (-pr <protocol>) allows you to start the
utility with a specific protocol type: NIC, iSCSI, or Fibre Channel. If you do not specify a protocol, all
protocols are enabled by default. Table 11 and Table 12 list the QConvergeConsole commands for
selecting a protocol.
Table 11. Windows QConvergeConsole CLI—Selecting a Protocol in Menu Mode
Command
qaucli
qaucli -pr nic [options]
qaucli -pr iscsi [options]
qaucli -pr fc [options]
qaucli -npar [options]
Table 12. Windows QConvergeConsole CLI—Selecting a Protocol in Legacy Mode
Command
qaucli -nic [options]
netscli [options]
qaucli iscsi [options]
iscli [options]
qaucli -fc [options]
scli [options]
Diagnostic help commands, and command options available for each specific protocol, are available by
specifying -h to the protocol, as shown in Table 13.
Table 13. Windows QConvergeConsole CLI—Getting Help
Command
-h
qaucli -pr nic -h
qaucli -pr fc -h
qaucli -pr iscsi -h
qaucli -npar -h
8200 Series Converged Network Adapter and 3200 Series Intelligent Ethernet Adapter
Start QConvergeConsole CLI in interactive mode
Issue NIC command line options
Issue iSCSI command line options
Issue Fibre Channel and FCoE command line
options
Issue NPAR command line options
Use NIC legacy command line
Use NIC legacy command line
Use iSCSI legacy command line
Use iSCSI legacy command line
Use Fibre Channel legacy command line
Use Fibre Channel legacy command line
Print usage of a specific adapter type, and then exit
Print NIC protocol usage, and then exit
Print Fibre Channel and FCoE protocol usage, and then exit
Print iSCSI protocol usage, and then exit
Print NPAR commands usage, and then exit
Description
Description
Description
77
Page