3. Return to the main menu after viewing the NPAR information and select option 7: NIC
Partitioning <NPAR> Configuration (Figure 37).
Figure 37: Selecting NPAR Configuration
4. Select option 1: NPAR Configuration to display the NPAR Configuration menu, which provides
the following options:
1: Bandwidth Configuration
2: Change PCI Function Personality
5. Configure the bandwidth settings to meet your system requirements.
For example, to change the bandwidth of the function 1 NIC partition:
a. Select option 1: Bandwidth Configuration.
b. Select option 1: Function:1.
c. Select option 1: Modify Minimum Bandwidth (Figure 38).
Figure 38: Selecting to Modify Minimum Bandwidth
8200 Series Converged Network Adapter and 3200 Series Intelligent Ethernet Adapter
59
Page