Lenovo 8200 Series Installation Manual page 92

• To perform a Flash test, issue the following command:
qaucli -pr nic testflash [cna_port_inst]
• To perform a hardware test, issue the following command:
qaucli -pr nic -testhw [cna_port_inst]
• To perform an interrupt test, issue the following command:
qaucli -pr nic -testinterrupt [cna_port_inst]
• To perform a link test, issue the following command:
qaucli -pr nic -testlink [cna_port_inst]
• To perform a register test, issue the following command:
qaucli -pr nic -testregister [cna_port_inst]
• To display transceiver DMI data, issue the following command:
qaucli -pr nic -trans [cna_port_inst]
Ethtool Diagnostics To perform an adapter self-test using ethtool-based diagnostics, issue the following
command:
# ethtool -t eth<x> offline
The self-test includes the following:
• Loopback test
• Interrupt test
• Link test
• Register test
Examples
# ethtool -t eth8 offline
The test result is PASS
The test extra info:
Register_Test_on_offline
Link_Test_on_offline
Interrupt_Test_offline
Loopback_Test_offline
# ethtool -t eth4
The test result is PASS
The test extra info:
Register_Test_on_offline
Link_Test_on_offline
Interrupt_Test_offline
Loopback_Test_offline
8200 Series Converged Network Adapter and 3200 Series Intelligent Ethernet Adapter
0
0
0
0
0
0
0
0
74
Page