Ford 2006 Escape Hybrid Owner's Manual page 234

Ford 2006 escape hybrid
Hide thumbs Also See for 2006 Escape Hybrid:
Table of Contents

Advertisement

Roadside Emergencies
relearning process. This is a normal condition and will not re-occur until
the low voltage battery is disconnected again.
1. Use only a 12–volt supply to start your vehicle.
2. Do not disconnect the battery of the disabled vehicle as this could
damage the vehicle's electrical system.
3. Park the booster vehicle close to the hood of the disabled vehicle
making sure the two vehicles do not touch. Set the parking brake on
both vehicles and stay clear of the engine cooling fan and other moving
parts.
4. Check all battery terminals and remove any excessive corrosion before
you attach the battery cables. Ensure that vent caps are tight and level.
5. Turn the heater fan on in both vehicles to protect any electrical
surges. Turn all other accessories off.
Connecting the jumper cables
1. Connect the positive (+) jumper cable to the positive (+) terminal of
the discharged battery.
Note: In the illustrations, lightning bolts are used to designate the
assisting (boosting) battery.
234

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Escape hybrid

Table of Contents