Climate Control Seats - Lincoln Navigator 2000 Owner's Manual

Seating and safety restraints
CLIMATE CONTROL SEATS (if equipped)
To operate the climate control seats the engine must be running.
• Slide the control to
the seatback and the seat
cushion.
• Slide the control to
the seatback and the seat
cushion.
In heat mode:
• Rotate the thumbwheel to select the desired heat level from 0 (OFF)
to 5 (MAX).
In cool mode:
• Rotate the thumbwheel to select the desired cooling level from 0
(OFF) to 5 (MAX). When setting 1 is selected, the seat(s) will provide
vent cooling only (same temperature as cabin air).
Allow five minutes for the temperature level to stabilize.
The thumbwheel selection level numbers will illuminate when the system
is turned on.
If the climate control seat is not turned OFF (0), the seat will return to
the selected temperature level each time the ignition is turned to ON.
CLIMATE CONTROL SEATS air filter replacement (if equipped)
The climate control seat system includes an air filter that has to be
replaced periodically. Refer to the Scheduled Maintenance Guide for
more information.
92
to heat
to cool
5 3