Compass Zone Adjustment; Compass Calibration Adjustment - Lincoln Navigator 2000 Owner's Manual

Controls and features

Compass zone adjustment

1. Determine which magnetic zone
you are in for your geographic
location by referring to the zone
map.
1
15
2
14
3
13
4
12
11
5
6
10
8 9
7
2. Locate the compass module
mounted on the center rear view
mirror post.
3. Turn ignition to the ON position.
4. Press and hold the RESET button
on top of the compass module until
the message display in the trip
computer shows the current zone
setting.
5. Release the RESET button.
6. Press the RESET button until the correct zone is displayed on the trip
computer.

Compass calibration adjustment

Perform this adjustment in an open area free from steel structures and
high voltage lines.
For optimum calibration, turn off all electrical accessories (heater/air
conditioning, wipers, etc.) and make sure all vehicle doors are shut.
1. Start the vehicle.
65