Safety Restraints; To Return Seat To Seating Position - Lincoln Navigator 2000 Owner's Manual

5. Lift latch up and out of floor tub
to upright position using the strap
on the latch.
6. Pull down support bar and push
into floor latch.

To return seat to seating position:

1. Hold seat and pull support bar from floor latch.
2. Rotate support bar up under seat.
3. Rotate floor latch down into floor tub.
4. Lower the seat. When the rear of the seat is 10–13 cm (4–5 in) above
the rear pins, let the seat drop. This will ensure that the seat will
properly latch into the floor.

SAFETY RESTRAINTS

Safety restraints precautions
Always drive and ride with your seatback upright and the lap
belt snug and low across the hips.
To reduce the risk of injury, make sure children sit where they
can be properly restrained.
Seating and safety restraints
101