Using the Centillion 50/100 ATMSpeed/155 Switch Modules and Media Dependent Adapters
Align the left and right edges of the printed circuit board carrier with the
3.
slot card guides on each side of the slot
Figure 2-3.
Slide the module into the chassis until you feel it engage the backplane.
4.
The inserter/extractor levers should still be protruding and in contact with the
front of the chassis. Do not push the module all the way into the chassis
(Figure
Figure 2-4.
2-4
Slot Module Guides
2-4).
Inserting the Module Until it Engages the Backplane
(Figure
2-3).
6466FA
6465
893-01047-B