Using the 8-port TokenSpeed and TokenSpeed/MCP Switch Modules
3.
Figure 3-3.
4.
Figure 3-4.
3-4
Align the left and right edges of the module in the guides on each side of
the slot (see
Figure
Slot module guides
Slide the module into the chassis until you feel it touch the backplane
(see
Figure
3-4).
The inserter/extractor levers should still be extended forward and in contact
with the front of the chassis. Do not push the module all the way into the
chassis.
Inserting the module into the chassis
3-3).
6465
6466
893-01019-A