Panasonic KX-TAW848 Installation Manual page 90

2.7 Connection of 2.4 GHz Portable Stations
Using the KX-TD7690
Select
"SYSTEM LOCK".
SEL
ENABLE
S1
DISABLE
ENTR
C.Tone
S1
Setting the Personal Identification Number (PIN) for PS Registration
To prevent registering the PS to a wrong PBX, a PIN for PS registration can be set to the PBX. Before
registering the PS to the PBX, enter the PIN set to the PBX into the PS. By doing so, the PS will only be
registered to the PBX with the matching PIN.
Notes
• By default, the PIN for PS registration is "1234" for both the PBX and PS. Therefore, the PS can
be registered to the PBX without setting the PIN.
• The PIN for PS registration will only be used when registering the PS to the PBX. Therefore, during
normal operation after registration, even if there is more than 1 PBX with the same PIN near the
PS, the PS will not be inadvertently linked to a different PBX.
Setting the PIN for PBX
[692]
STORE
Setting the PIN for PS
Using the KX-TD7680
Select
"CHANGE PIN"
Using the KX-TD7690
Select
"CHANGE PIN"
90 Installation Manual
SEL CHNG
Choose
S1 S1
"Enable/Disable".
System Lock Password
4 digits
PIN for PS Registration
4 digits
1234
PIN for PS Registration
1 to 4 digits
1234
SEL
PIN for PS Registration
1 to 4 digits
S1
1234
ENTR
System Lock Password
S1 4 digits
STORE END
C.Tone
ENTR
C.Tone
S1