Yamaha Aventage RX-A3040 Owner's Manual page 52

1 2 3 4 5 6 7 8 9 10
Cursor keys
ENTER
4
To save the measurement results, use the cursor
keys (e/r) to select "SAVE" and press ENTER.
The adjusted speaker settings are applied.
• To finish the measurement without saving the result, select "CANCEL".
5
Use the cursor keys (e/r) to select "YES" or "NO"
to enable/disable YPAO Volume and press ENTER.
• If YPAO Volume is enabled, the high- and low-frequency levels are
automatically adjusted according to the volume so that you can enjoy
natural sounds even at low volume.
• You can also enable/disable YPAO Volume in "YPAO Volume" (p.108) in the
"Option" menu.
6
Disconnect the YPAO microphone from the unit.
This completes optimization of the speaker settings.
Caution
• The YPAO microphone is sensitive to heat, so should not be placed anywhere
where it could be exposed to direct sunlight or high temperatures (such as on
top of AV equipment).
PREPARATIONS ➤ Optimizing the speaker settings automatically (YPAO)
52
En