Connecting Audio Devices (Such As Cd Players) - Yamaha Aventage RX-A3040 Owner's Manual

1 2 3 4 5 6 7 8 9 10
■
Composite video connection
Connect a video device to the unit with a video pin cable and an audio cable (digital
coaxial, digital optical, or stereo pin cable). Choose a set of input jacks (on the unit)
depending on the audio output jacks available on your video device.
Output jacks on video device
Video Audio
Digital coaxial
Composite video Digital optical
Analog stereo
The unit (rear)
AV 1–4 (VIDEO) jacks
V
C C
O O
L
R
Any of AV 1–2 (COAXIAL),
AV 3–4 (OPTICAL), (any of digital coaxial, digital optical,
AV 1–4 (AUDIO) jacks
If you select the input source by pressing AV 1–4 on the remote control, the video/audio
played back on the video device will be output from the unit.
Input jacks on the unit
AV 1–2 (VIDEO + COAXIAL)
AV 3–4 (VIDEO + OPTICAL)
AV 1–4 (VIDEO + AUDIO)
Video output
(composite video)
VIDEO
V
COAXIAL
Video device
OPTICAL
L
L
R
R
Audio output
analog stereo)

Connecting audio devices (such as CD players)

Connect audio devices such as CD players, MD players, and a turntable to the unit.
Depending on the audio output jacks available on your audio device, choose one of the
following connections.
• The following explanation is based on the assumption that you have not changed the "Input Assignment"
setting (p.138) in the "Setup" menu. As necessary, you can assign the COAXIAL (a, b, f) and OPTICAL
(c, d, e) jacks to another input source.
• If you make more than one audio connection for one input source, an audio signal played back on the unit
will be determined according to the "Audio Select" setting (p.110) in the "Option" menu.
Audio output jacks on audio device
Digital coaxial
Digital optical
Analog stereo
Turntable (PHONO)
PREPARATIONS ➤ Connecting playback devices
Audio output jacks on the unit
AV 1–2 (COAXIAL)
AUDIO 2 (COAXIAL)
AV 3–4 (OPTICAL)
AUDIO 1 (OPTICAL)
AV 1–4 (AUDIO)
AUDIO 1–4 (AUDIO)
PHONO
En
39