Yamaha Aventage RX-A3040 Owner's Manual page 118

Item Function
Adjust the decay time of the rear
Reverb Time
reverberant sound.
Adjusts the delay between the
Reverb Delay direct sound and reverberant
sound generation.
Adjusts the volume of the
Reverb Level
reverberant sound.
The following items are available when you select "2ch Stereo" or "9ch Stereo".
Settings
1.0 s to 5.0 s Sound program
Higher to enrich the reverberant
sound and lower to have clear
sound.
2ch Stereo
0 ms to 250 ms
Higher to enhance the delay
effect, and lower to reduce it.
0% to 100%
Higher to strengthen the
reverberant sound, and lower to
weaken it.
9ch Stereo
• Available items in "9ch Stereo" vary depending on the speaker system being used.
CONFIGURATIONS ➤ Configuring sound programs/surround decoders (Sound Program menu)
Item Function
Selects whether to
automatically bypass the
Direct DSP circuit when an
analog audio source is
played back.
Level Adjusts the entire volume. -5 to 0 to +5
Adjusts the front and rear
Front / Rear Balance
volume balance.
Adjusts the left and right
Left / Right Balance
volume balance.
Adjust the height volume
Height Balance balance using the
presence speakers.
Enables/disables
Monaural Mix
monaural sound output.
Settings
Auto, Off
-5 to 0 to +5
Higher to enhance the front
side, and lower to enhance
the rear side.
-5 to 0 to +5
Higher to enhance the right
side, and lower to enhance
the left side.
0 to 5 to 10
Higher to enhance the
upside, and lower to
enhance the downside. (The
presence speakers do not
produce sounds when
"Height Balance" is set to
"0".)
Off, On
118
En