Table of Contents
Advertisement
Access Code
If the system requires an Access Code, enter the code and press OK to proceed making a call:
Using sub-address / extension address / MCU password
To specify an ISDN sub-address or its LAN equivalent extension address (TCS-4), add a star (*) after the number
and then enter the sub-address/extension address.
Example:
12345678*10 ( <number>*<Sub-address/extension address/MCU password>)
When calling to external MCU's requiring a password (TSC-1), this password can be added after the star (*). If no
password is specified, a menu will prompt you to enter the password (after connected to the MCU).
S
-
UB
ADDRESS IS USED TO ADDRESS DIFFERENT SYSTEMS ON THE SAME
TIP
TCS-4
IS USED TO ADDRESS DIFFERENT SYSTEMS ON A
TANDBERG Videoconferencing System
ISDN
LAN,
WHEN DIALING IN VIA A GATEWAY
17
.
LINE
.
Getting started
Advertisement
Table of Contents
