Removing The Detergent Dispenser Assembly - Kenmore 110.42822200 User Manual

R E M O V I N G T H E D E T E R G E N T
D I S P E N S E R A S S E M B L Y
The Detergent Dispenser Assembly is located
under the washer top. Begin by removing the
washer top, console and front panel.
Separate the water inlet and window washer tube
from the boot.
Pullthe water inlet tube from the outlet connector
of the detergent dispenser. (Fig. 3-16)
NOTE: When reinstalling the water inlet tube,
wet the water inlet gasket on the detergent dis-
penser with water only. Do not use any other lu-
bricant. Align the locator nib on the water inlet
tube with the indentation on the dispenser con-
nector and slide the tube onto the detergent dis-
penser assembly.
Remove the screw securing the front of the de-
tergent dispenser assembly to the top front f rame
member. (Fig.3-16)
Water lnlet
Tube
F i g . 3 - 1 6
Disconnect the overflow hose f rom the detergent
dispenser assembly. (Fig. 3-17)
Remove the screw securing the detergent dis-
penser assembly to the top left frame member.
(Fig. 3-17) Slide the assembly back slightly and
lift the assembly out.
Vent
Tube
To remove the detergent dispenser motor assem-
bly, lift the cam follower from the diverter cam
and rotate the diverter cam clockwise to access
the motor mounting screws.
Sclews
(Under
Gam)
F i g . 3 - 1 8
f "
i'
tt
i "
t
F i g . 3 - 1 7
Screw
3 - 5