9
When you finish configuring any network or update settings, navigate to the ACE
Management Server Setup Web application to configure the server.
To access that application, choose one of these methods:
From the Appliance Management and Configuration Web application page,
click the ACE Login link in the upper‐right corner of the page.
From a command prompt window, close the window, open a browser, and
enter the URL for the ACE Management Server Setup Web application:
https://<hostIPaddress>:8000/
10 Click Configuration to open the Web application.
Verify That the Apache Service Is Started or Restarted
If you installed ACE Management Server on a Linux host, verify that the Apache
service is started before you attempt to log in.
For troubleshooting purposes, you might occasionally need to manually restart the
Apache service that ACE Management Server uses.
To verify that the Apache service is started or restarted
Do one of the following:
On Windows hosts:
a
Click the Apache icon in the taskbar.
b
Select Apache2 in the menu that appears.
c
Choose the appropriate command:
VMware, Inc.
To start the service if it is stopped, click Start.
If the service is already started, this command is unavailable.
To restart, click Stop and then click Start.
Ensure that you click Stop and Start rather than Restart.
Chapter 3 Installing and Configuring ACE Management Server
31