Creating Access Control - VMware ACE EN-000042-00 Administrator's Manual

Management server
Table of Contents

Advertisement

If the existing schema is not compatible, no schema is available or the schema cannot be 
upgraded. If you overwrite the existing schema and data, a new schema is created. 
If you do not overwrite the existing schema and data, the configuration application quits.
If you are upgrading the server from the previous release, the database schema is 
upgraded automatically and you do not lose your previous data. The upgrade is 
performed on the first start of the upgraded server, even if you do not rerun the setup 
application.
If you make changes to the information on the Database tab, you must click Apply or 
Cancel before you can navigate to another tab.

Creating Access Control

On the Access Control tab, you can create a local Administrator role and Help Desk 
role or use Active Directory for authenticating users with these roles.
Before you can configure the ACE Management Server to use a domain account for 
authentication, you must create users and groups so that ACE Management Server can 
connect to the LDAP server. See "Create Users and Groups for Integration with Active 
Directory" on page 38. 
Use the following information to help you complete the fields for authentication:
Local account – If you specify a password for the Administrator role and forget or 
lose it, you must delete the server configuration file. Deleting this file sets the 
server back to its initial state. You must reconfigure the server and set the 
administrator password again. 
See "Delete the Server Configuration File and Set a New Administrator Password" 
on page 71. 
Domain account (LDAP) – To use Active Directory for authentication, specify the 
host and credentials that the ACE Management Server uses to connect to and 
query the domain controller: 
Host Name – Enter a fully qualified domain name (for example, 
ldap.vmware.com) instead of an IP address or host name with no parent 
domain name (for example, ldap).
Query User sAMAcountName and Query User Password – Use the 
password and short name for the user account you created for this purpose in 
Active Directory. 
VMware, Inc.
Chapter 4 Configuration Options for ACE Management Server
47

Advertisement

Table of Contents
loading

This manual is also suitable for:

En-000042-00Ace management server

Table of Contents