Installing Side Burners - Cal Flame 2008 Owner's Manual

Barbecue grills and carts
Table of Contents

Advertisement

Installing Side Burners

1.
Assemble a 3/8" pipe nipple to the 3/8" pipe tee
using Teflon tape or pipe sealant. Use only sealant
that is approved for use on LP gas.
2.
Install the pipe tee assembly to the grill intake pipe.
Tighten assembly and align the branch opening of
the tee with the hole of the cabinet.
Items Included with Barbecue
1) "T" adapter (3/8")
2) 2 each Hose 3/8" Fittings
3) Regulatorw/ Hose
"T" Adapter (3/8" Threaded)
Items Included with Barbecue
1) "T" adapter (3/8")
To grill, located
2) 2 each Hose 3/8" Fittings
underneath and
3) Regulatorw/ Hose
behind grill
"T" Adapter (3/8" Threaded)
To grill, located
underneath and
behind grill
From Grill
From Grill
3/8" Fittings
3/8" Fittings
NOTE: You will need to use a gas rated
NOTE: You will need to use a gas rated
sealer on gas connectors that are not flared.
2008 Barbecue Grill and Cart Owner's Manual
LTR20081038, Rev. B
To side burner, located
underneath behind burner.
To side burner, located
From Side Burner
underneath behind burner.
From Side Burner
To Propane Tank
sealer on gas connectors that are not flared.
GAS LINE
GAS LINE
3.
Connect the flexible hose (male end) to the pipe
tee.
4.
Install and secure the side burner into the island by
simply setting it in place.
5.
Connect the female end of the flexible hose to the
side burner intake pipe.
6.
Connect gas supply to the grill.
7.
Check for gas leaks using soap water solution.
Open barbecue door. Install hose with regulator on propane
A
tank. Then connect other end to "T" adapter. Make sure to
use gas rated tape seal when installing adapter to insure
proper seal.
Grill
Open barbecue door. Install hose with regulator on propane
A
tank. Then connect other end to "T" adapter. Make sure to
use gas rated tape seal when installing adapter to insure
proper seal.
Grill
Then take other end of "T" adapter with hose attached
B
and connect to end of male located underneath and at
the back of the grill. (Use gas rated tape seal on all
Then take other end of "T" adapter with hose attached
B
connections).
To Propane Tank
and connect to end of male located underneath and at
the back of the grill. (Use gas rated tape seal on all
connections).
Connect the last open line to the side burner
C
(Use gas rated tape seal on all connections)
Connect the last open line to the side burner
C
(Use gas rated tape seal on all connections)
Installation / Assembly
C
B
C
B
A
A
Page 11

Advertisement

Table of Contents
loading

Table of Contents