Installing The Transformer - Cal Flame 2008 Owner's Manual

Installing the Transformer

All grills with electrical components such as lights or a convection fan
will require the transformer to be installed and plugged in before you
can use it. This needs to be done before the grill is inserted in the
island or modular cart. When the transformer is attached to the grill
chassis, use care in placing the grill in the island cutout to avoid hitting
the transformer.
1. Remove the transformer and the metal screws from the plastic
bag.
2. Place the grill on a sturdy surface and tilt it back to show the
underside of the grill.
3. Using the metal screws, attach the transformer to
the left side of the grill near the internal electrical
connection. Attach the metal plate to the outside
surface of the grill as shown in the figure below.
2008 Barbecue Grill and Cart Owner's Manual
LTR20081038, Rev. B
Installation / Assembly
4. When you have firmly tightened the screws and
nuts, connect the plug from the transformer to the
grill. Screw on the stainless steel retainer.
Page 9