Garmin GPSMAP 162 Owner's Manual page 13

www.reelschematic.com
www.reelschematic.com
Getting Started
Initializing the Receiver
Self-Test Screen
Warning Screen
4
The GPSMAP 162' s advanced keypad system is designed to allow for fast, convenient selection of
navigation options and data entry. The Getting Started Tour will introduce you to the keypad and
provide a 'hands-on' lesson in using the GPSMAP 162. We strongly encourage you to take the Getting
Started tour before using your unit for actual navigation.
The GPSMAP 162 Quick Reference Guide contains helpful tips on using the unit and performing
various navigation tasks. It' s a good idea to keep the Quick Reference Guide nearby whenever you're
operating your new GPSMAP 162.
Initializing the Receiver
The fi rst time you power up your new GPSMAP 162, the receiver must be given an opportunity to
collect satellite data and establish its present position. To ensure proper initialization, the GPSMAP 162
is shipped from the factory in AutoLocate mode, which will allow the receiver to "fi nd itself" anywhere
in the world. To speed up the initialization process, we recommend using the graphic initialization
process described on the next page, which will usually provide a position fi x within a few minutes.
Before you initialize, make sure the GPSMAP 162 unit and antenna have been correctly installed
on your vessel according to the instructions in Appendix G. The antenna needs to have a clear and
unobstructed view of the sky to receive satellite signals.
To turn the GPSMAP 162 on:
1. Press and hold the POWER key until the power tone sounds and the display comes on, then
release the POWER key.
The welcome page will appear while the unit conducts a self-test. Once the internal test is
complete, a warning page will appear, asking you to read and acknowledge important information
regarding the proper use of the unit.
To acknowledge the warning:
1. After reading the warning, press the ENTER/MARK key if you agree.