System Requirements; Windows - Toshiba GA-1040 Operator's Manual

xii Introduction

System requirements

To install the GA-1040 user software on a Windows or Mac OS computer, the
computer must be equipped with a built-in or external CD-ROM drive.

Windows

To print to the GA-1040, you need:
• A Windows-based computer with an 80486, AMD, or Pentium processor
• Windows 95/98, Windows Millennium (Me), Windows 2000, or Windows NT 4.0
• At least 24MB of RAM for Windows 95/98
• At least 32MB of RAM for Windows Me
• At least 32MB of RAM for Windows NT 4.0
• At least 64MB of RAM for Windows 2000
With Microsoft Windows 95/98/Me, you also need:
• IPX/SPX or TCP/IP networking protocol installed
• Adobe PostScript Printer Driver version 4.2 or later for Windows 95/98/Me
(version 4.3.1 is included with the user software)
With Microsoft Windows NT 4.0 and Windows 2000, you also need:
• IPX/SPX, TCP/IP or AppleTalk networking protocol installed
• Microsoft PostScript Printer Driver for Windows 2000 (included with your
Windows 2000 operating system)
• Adobe PostScript Printer Driver version 5.1 for Windows NT 4.0 (version 5.1 is
included with the user software)