Advertisement
Attaching to a KLA181 Loudspeaker
AARNRNG!: A KLA Array consists of one of the following array configuration options. The maximum number of KLA12
Loudspeakers in any array, with or without KLA181 Loudspeakers, is five.
1. Insert the 6 mm hex key (supplied) into the hex socket on KLA181 and rotate the key fully to the Unlocked Position. (Both sides of loudspeaker.)
2. Place the KLA AF12 Array Frame on top of the KLA181, nesting the four feet
attaching hook as shown in
— Figure
3. Insert the 6 mm hex key into the hex socket
4. Turn the key fully to the Locked Position on both sides of the loudspeaker. In the final, Locked Position, you can see a small portion of the hook in
the bottom of the view hole (2).
5. Test the assembly by trying to separate the two units.
— Figure 7 —
7. Make sure that the surfaces are aligned and parallel.
2
1
— Figure 8 —
(Figure 8, 1)
in the KLA181.
2
1
(2)
on the array frame into the spaces
KLA AF12
KLA181
5
(1)
in front of and behind the
Advertisement
