Advertisement
Attaching to a KLA12 Loudspeaker
AARNRNG!: A KLA Array consists of one of the following array configuration options. The maximum number of KLA12
Loudspeakers in any array, with or without KLA181 Loudspeakers, is five.
— Figure 4 —
1. Refer to
— Figure
4. Make sure that the levers labeled "B" are up, and slides
2. Refer to
— Figure
5. Place the assembled KLA AF12 Array Frame, on top a KLA12. Nest the four feet
(2)
on the loudspeaker. Make sure that the surfaces are aligned and parallel.
B
3. On the bottom loudspeaker, push button "A". Slide
4. Rotate Lever "B" down to the
AARNRNG!: Make sure the loudspeakers are properly aligned, and that the Lever locks are in the down, locked position. Lift
array a small amount to confirm assembly.
1
PUSH
1
(1)
automatically moves to
Locked
Position.
(1)
are down on both sides of the loudspeaker.
SLIDES UP
— Figure 6 —
Up
Position.
4
1
2
— Figure 5 —
(1)
on the array frame into the feet receptacles
ROTATE DOWN
Advertisement
