Electrostatic Discharge Point - Juniper SRX 5600 Installation Instructions Manual

Figure 4: Placing a Component into an Electrostatic Bag

Electrostatic Discharge Point

Figure 5 on page 9 and Figure 6 on page 10 show the location of the ESD point on
the front of each chassis.
Figure 5: Front View of a Fully Configured SRX 5600 Services Gateway Chassis
Avoid contact between the component and your clothing. ESD voltages emitted
from clothing can still damage components.
When removing or installing a component, always place it component-side up
on an antistatic surface, in an antistatic card rack, or into an electrostatic bag
(see Figure 4 on page 9). If you are returning a component, place it into an
electrostatic bag before packing it.
Electrostatic Discharge Point
Electrostatic Discharge Point
9