Select Fan Setting (On/Auto/Circ); Clean Screen; Maintenance Reminders - Aprilaire 8800 Universal Owner's Manual

OPERATION
SELECT FAN SETTING
When the fan mode is changed during a program event
it remains in that mode until the next event starts. The
run continuously through all events.
Press [FAN] to select:
ON:
air circulation/cleaning.
AUTO:
system is on.
CIRC:
least 20 minutes per hour. Use this mode for a balance
of energy savings and air circulation/cleaning.
Press [DONE]
without saving. The thermostat will save and exit if
nothing is pressed within 10 seconds.
61000762A 8800 Tstat Owners.indd 7
(ON/AUTO/CIRC)
[CANCEL] to exit

CLEAN SCREEN

Press [MENU] to enter the main menu.
Press [CLEAN SCREEN] to disable the touch screen
for 30 seconds for cleaning.
Note: Use a soft damp cloth to clean the screen. Use
directly on the screen.

MAINTENANCE REMINDERS

Maintenance reminders are set up by the installer to
dealer for service. They can be cleared by pressing
[MENU]
each reminder.
[Next] to clear
7
3/28/11 4:20:01 PM