Pause Insertion - Panasonic KX-TAW848 Feature Manual

1.13 P
For more information about programmer codes, see Section 2.1.2 Access Levels in the PC Programming
Manual.
Warning to the Administrator or Installer regarding the system password
1.
Please provide all system passwords to the customer.
2.
To avoid unauthorized access and possible abuse of the PBX, keep the passwords secret, and
inform the customer of the importance of the passwords, and the possible dangers if they become
known to others.
3.
The PBX has default passwords preset. For security, change these passwords the first time that
you program the PBX.
4.
Change the passwords periodically.
5.
It is strongly recommended that passwords of 10 numbers or characters be used for maximum
protection against unauthorized access. For a list of numbers and characters that can be used in
system passwords, refer to Section 1.1.2 Entering Characters in the PC Programming Manual.
6.
If a system password is forgotten, it can be found by loading a backup of the system data into a
PC, and checking the password using the Maintenance Console software. If you do not have a
backup of the system data, you must reset the PBX to its factory defaults and reprogram it.
Therefore, we strongly recommend maintaining a backup of the system data. For more information
on how to back up the system data, refer to the PC Programming Manual.
However, as system passwords can be extracted from backup copies of the system data file, do
not allow unauthorized access to these files.
Programming References
PC Programming Manual
1.1.2 Entering Characters
2.1.2 Access Levels
2.16.1 [10-1] Main—Password
PT Programming Manual
None
Feature Manual References
2.1 Capacity of System Resources

1.13.4 Pause Insertion

Description
Pressing a PAUSE button inserts a preprogrammed Pause time between digits of a user-dialed number
before the number is dialed out, allowing certain numbers separated with a pause to be used to access
certain features (e.g., access codes, seizing idles lines, etc.).
When a pause is needed, pauses must be inserted manually (pressing the PAUSE button) in all cases,
except for the following access codes where a pause is automatically inserted between the user-dialed
access code and the subsequent digits:
a)
Host PBX Access code (→ 1.8.5 Host PBX Access Code (Access Code to the Telephone
Company from a Host PBX))
b)
Special Carrier Access code (→ 1.16.2 Special Carrier Access Code)
156 Feature Manual