Transmitter - Ramsey Electronics FM100B Instruction Manual

F. TRANSMITTER
This is where we definitely want to have clean soldering skills and proper me-
chanical mounting of parts. If you need a review, shoot back to the start of the
manual in the "STRATEGY" section for tips, especially for surface mount as-
sembly. Make sure all your parts are flush to the board and not waving in the
breeze. You will not only lose performance if parts aren't installed correctly,
but your kit may not work at all! Have patience and follow all directions and
you should have no trouble at all.
1F. Install R33, a 4.7K ohm resistor (yellow-violet-red).
2F. Install R28, a 4.7K ohm resistor (yellow-violet-red).
3F. Install R41, a 4.7K ohm resistor (yellow-violet-red).
4F. Install R39, a 4.7K ohm resistor (yellow-violet-red).
5F. Install C29, a 10 uF electrolytic capacitor (orientation, don't forget!)
6F. Install C35, a 10 uF electrolytic capacitor.
7F. Install C21, a 33 pF ceramic disk capacitor (marked 33).
8F. Install C27, another 33 pF ceramic capacitor (marked 33).
9F. Install C38, a 150 pF ceramic capacitor (marked 151).
10F. Install C37, a 0.0033 uF ceramic capacitor (marked 332).
11F. Install C33, a 150 pF ceramic capacitor (marked 151).
12F. Install C32, another 0.0033 uF ceramic capacitor (marked 332).
FM100B • 32