Installing the Switch on a Table, Shelf, or Desk
Attaching the Optional Cable Guide
Note
Figure 3-17 Attaching the Cable Guide
SYS T
1x
RPS
STA T
UTIL
DUP LX
SPE ED
MOD E
Cable guide screw
Installing the Switch on a Table, Shelf, or Desk
Catalyst 2950 Desktop Switch Hardware Installation Guide
3-22
We recommend attaching the cable guide to prevent the cables from obscuring the
front panels of the switch and other devices installed in the rack. Use the supplied
black Phillips machine screw to attach the cable guide to the left or right bracket,
as shown in
Figure
3-17.
You cannot use the cable guide with Catalyst 2950 LRE switches.
2x
3x
4x
5x
6x
7x
8x
10 Ba se-
9x
T / 10 0B
10 x
ase -TX
11 x
12 x
13 x
14 x
15 x
Before placing the switch on a table, shelf, or desk, locate the adhesive strip with
rubber feet in the mounting-kit envelope, and attach four rubber feet to the
recessed areas on the switch bottom. Place the switch on a table, shelf, or desk
near an AC power source or DC-input power source.
Start the terminal-emulation software and provide power to the switch. See
Chapter 1, "Quick Installation,"
16 x
17 x
18 x
Ca tal ys t 29
19 x
50
20 x
SER IES
21 x
22 x
23 x
24 x
for instructions.
Chapter 3
Installation
78-11157-05