Uconnect™ Voice Command - Dodge Challenger 2013 User Manual

Mute (Or Unmute) Microphone During Call
• During a call, press the "Voice Command" button
• (After the BEEP), say "mute" (or "mute off").
Transfer Ongoing Call Between Handset And Vehicle
• During a call, press the "Voice Command" button
• (After the BEEP), say "transfer call".
Changing The Volume
• Start a dialogue by pressing the "Phone" button
normal call.
• Use the radio ON/OFF VOLUME rotary knob to adjust the volume to a comfortable level
while the Uconnect™ system is speaking. Please note the volume setting for Uconnect™
is different than the audio system.
• Any voice commanded system should be used only in safe driving conditions follow-
ing applicable laws and phone use. All attention should be kept on the roadway
ahead. Failure to do so may result in a collision causing you and others to be severely
injured or killed.
• In an emergency, to use Uconnect™ Phone, your mobile phone must be:
• turned on,
• paired to Uconnect™ Phone,
• and have network coverage.
Uconnect™ VOICE COMMAND
Uconnect™ VOICE COMMAND
• The Uconnect™ Voice Command system allows you to control your AM, FM radio, satellite
radio, disc player, HDD, Uconnect™ Phone, a memo recorder, and supported portable
media devices.
• When you press the "Voice Command" button
steering wheel, you will hear a beep. The beep is your signal to give a command. If you
do not say a command within a few seconds, the system will present you with a list of
options. If you ever wish to interrupt the system while it lists options, press the "Voice
Command" button
NOTE:
Visit http://www.driveuconnect.com/features/voiceCommand/ for more info on which voice
command features apply to your vehicle
WARNING!
, listen for the BEEP, and say your command.
ELECTRONICS
.
.
, then adjust the volume during a
located on the radio faceplate or
61