Dodge Challenger 2013 User Manual page 61

Phone Pairing
NOTE:
• Pairing is a one-time initial setup before using the phone.
• Prior to starting the pairing procedure ensure all additional phones within the vehicle have
their Bluetooth® disabled.
• The Uconnect™ Phone requires a mobile phone equipped with the Bluetooth® Hands-Free
Profile, Version 1.0 or higher. For Uconnect™ customer support, call 1–877–855–8400 or
visit www.UconnectPhone.com. This site will provide specific instructions based on the
type of mobile phone being paired.
NOTE:
Pairing is a one-time initial setup before using the phone.
• Press the "Phone"
• Wait for the "ready" prompt and BEEP.
• (After the BEEP), say "setup" or "Uconnect device setup".
• (After the BEEP), say "device pairing".
• (After the BEEP), say "pair a device".
• Follow the audible prompts.
• You will be asked to say a four-digit Per-
sonal Identification Number (PIN), which
you will later need to enter into your mobile
phone. You can say any four-digit PIN. You
will not need to remember this PIN after the
initial pairing process.
• You will then be prompted to give the phone pairing a name (each phone paired should
have a unique name).
• Next you will be asked to give this new pairing a priority of 1 thru 7 (up to seven phones may
be paired); 1 is the highest and 7 is the lowest priority. The system will only connect to the
highest priority phone that exists within the proximity of the vehicle.
• You will then need to start the pairing procedure on your cell phone. Follow the Bluetooth®
instructions in your cell phone Owner's Manual to complete the phone pairing setup.
button to begin.
ELECTRONICS
59