Tanita BC-420MA Instruction Manual page 19

Operating Instructions
GB
4 Input an ID number.
Input it by pressing –
0
Note
• This screen is not displayed in the case that OFF is
set in the "setting with or without an ID" (
page 15).
• The ID number can be input from 0 – 9999999999.
• If it is mistakenly input,
e press (the input is deleted).
CE
• If is pressed in the state that an ID number is not input, it returns to the "measurement
CE
start."
5
Press
Enter / Next
Note
• This screen is not displayed in the case that OFF is
set in the "setting with or without an ID" (
page 15).
display goes off sequentially.
The lamp flashes for "step on."
Note
• If is pressed, it returns to the previous
CE
screen.
36
when using as a scale (continued)
.
9
.
6 Measurement completion
The measurement result and the body fat percentage
evaluation are displayed.
It is automatically printed out. (In the case that other
than 0 is set in the "Setting the number of sheets to
print" ( page 13).
Step off the platform.
It returns to the "measurement start" screen.
GB
37