Operating Instructions - Tanita BC-420MA Instruction Manual

Operating Instructions

GB
This explains the procedure when the printer is turned on. Please be aware that the display may be
different if the number of print outs is set to
• Do not wipe the equipment with corrosive chemicals (gasoline, cleaner, etc.). Please use a neutral
detergent to clean the equipment.
• When the equipment has been transferred to any location where there is a temperature difference of
20˚C or more, wait for at least two hours before using it.
• In taking measurements, please keep the person away from the unit, who uses transmitters such as a
mobile phone avoid causing margin errors.
About Athletic Mode
• It is recommended for those who are 18 years old or older and meet the following conditions to select
"Athletic Mode" and measure as reference values.
- Those who exercise for 12 hours or more per a week.
- Those who belong to a sport team or a sport organization with the aim of participation in competition,
etc.
- Those who exercise to build up like a bodybuilder.
- Those who are professional athletes.
Attention
• The posture when measuring
- Stand with both feet parallel on the electrodes.
- Stand fullface without bending knees.
• The age input range is 5 – 99 years old.
Input age 99 for those who are 100 years old or older.
Note
• False results may be reported after excessive food/fluid intake, or after periods of intense exercise.
• When the user is 18 years or older, Athletic mode can be used.
• When Clothes weight is input, Clothes weight is subtracted from measurements and it displays it as
Weight.
In the case of the standard flow (not the one step mode)
In the standard flow, after measuring weight, personal data is input and then body composition is measured.
s
Weight measurement Personal data input
1
Press to turn on the
power.
24
when using as a body
.
0
s
Body composition measurement
composition analyzer
2 Check that the body
composition monitor is selected
and input the clothes weight.
Input it by pressing – and
0 9
Note
• The clothes weight (preset tare) can be input in the
range of 0.0 – 10.0 kg.
• To correct the input value,
e press (the input is deleted).
CE
3
Press .
Enter / Next
The "step on" lamp flashes.
Note
• When is pressed, it returns to the previous
CE
screen.
.
.
GB
25