I Features - Ryobi BD4600 Operator's Manual

KNOW YOUR BELT/DISC SANDER
See Figure 3.
Before attempting to use your belt/disc sander, familiarize
yourself with all the operating and safety requirements.
BEVEL GAUGE
The worktable comes equipped with a bevel gauge that
indicates the degrees the worktable can be tilted up to 45°.
BELT TENSION LEVER
The belt tension lever releases the belt tension for easy belt
replacement.
HORIZONTAL AND VERTICAL POSITION HOLES
The horizontal and vertical position holes are used for
changing the position of the belt from horizontal to vertical.
SANDING BELT
The sanding belt can be adjusted from horizontal to vertical
providing different positions for sanding workpieces of
different shapes and sizes.
WORK
SUPPORT
GAUGE
BEVEL
FEATURES
SANDING DISC
A round sanding disc located on the side of the belt/disc
sander.
SWITCH AND SWITCH KEY
Your disc/belt sander has an easy access power switch. To
lock in the OFF position, remove the switch key. Place the
key in a location inaccessible to children and others not
qualified to use the tool.
TRACKING KNOB
A tracking knob aids in centering the sanding belt.
WORK SUPPORT
Supports the workpiece on the sanding belt.
WORKTABLE
Equipped with a sturdy, worktable that provides a stable
surface when using either the disc sanding or the belt sanding
feature.
TRACKING
KNOB
BELT
TENSION
LEVER
SWITCH
AND
SWITCH KEY
SANDING
DISC
HORIZONTAL AND
POSITION HOLES
8
SANDING
BELT
VERTICAL
WORKTABLE
Fig. 3